Home ﹥ Products > PRESS (沖床)

Weingarten (5300 ton) Screw Press (hot forging)
Model: PSH 4.560f
Year: 1990
Country of origin: Germany

Capacity: 5300 ton
Hard Blow / Peak Force: 6,300 tons
Gross Energy (at 500mm stroke): 630 kNm)
Screw Diameter: 560 mm
Maximum Stroke: 600 mm
Minimum Stroke: 250 mm
Distance Between Table & Ram (Shut Height): 1,250 mm
Max. Daylight (Stroke Up): 1,850 mm
Clearance Between Guides (Width): 1,500 mm
Table Area (Width x Depth): 1,300 x 1,400 mm
Ram Area (Width x Depth): 1,300 x 1,400 mm
Max. Cycle Rate (Strokes/min): 35 spm
Cycle Time at Max. Energy: 3.5 sec
Total Press Weight: 230 Metric Tons
Height Above Floor: 7,500 mm

Kawasaki (2000 ton) Die Spotting Press (hot forging)
Model: AFP2-2000
Year: 2016

Main Press:
Maximum Stroke: 1300 mm
Daylight: 2300 mm
Effective Table Dimensions: R.L. 1650 × F.B. 2400 mm
Rotating Table Dimensions: 1600 mm
Slide Dimensions: R.L. 1650 × F.B. 1500 mm
Effective Frame Clearance: R.L. 3000 × F.B. 1200 mm
No-load Descent Speed: 300 mm/s

Pressing Speed:
Low Output (up to 15000 kN): 45 mm/s (at 1000 kN) ~ 30 mm/s (at 15000 kN)
High Output (up to 20000 kN): 30 mm/s (at 15000 kN) ~ 23 mm/s (at 20000 kN)
Ascent Speed: 300 mm/s
Die Matching Speed: Approx. 50 mm/s

Table Transfer Device (Hydraulic Cylinder Drive):
Dimensions: R.L. 1650 × F.B. 4200 mm
Transfer Stroke: 2500 mm
Transfer Speed: 200 mm/s
Loading Capacity: Approx. 10 tons

Upper Table Rotating Device (Hydraulic Motor Drive)
Dimensions: 1500 mm
Rotation Angle: 90 degree, 180 degree